For the use of painting equipment, a lot of requirements have been relaxed now, and professional personnel are no longer required to operate it. Ordinary people can also get the equipment and start using it. At the same time as this universality has b…
Test fixtures have been widely used before the industrial age, including mechanical fixtures, woodworking fixtures, welding fixtures, jewelry fixtures, and other …
The frame is usually welded by section steel. The chain conveyor equipment uses the chain as the main working part. The chain is the main body of the load, and the chain is a flexible structure. Therefore, the chain of the load bearing part must be su…
One: Air lines of spraying fixture: Irregular blocks appear on the coating surface, most of which are round, the color is darker than other parts, and the surface is rough.Reason: The air in the mold is not completely eliminated during forming. Sprayi…
1. The sprocket should be installed on the shaft without skew or swing. The end faces of the two sprockets in the same transmission assembly should be in the same plane. When the center distance of the sprocket is less than 0.5 meters, the allowable d…
The quality of the design of the coating equipment process layout is crucial to the use of the coating production line. If the process layout of the coating equipment is improper, even if the individual equipment is made well, the entire coating produ…
Fixture is a device used to fix the processing object in the mechanical manufacturing process so that it occupies the correct position to accept construction or inspection.1. Positioning componentsIt is in contact with the positioning datum of the wor…
Solution treatment is to heat the casting to the highest possible temperature, close to the melting point of the eutectic. The higher the temperature, the faster the dissolution of strengthening elements and the better the strengthening effect. Genera…
(1) Personnel entering and exiting the clean room of spraying jigs should observe: spraying jigs1. Management of entering the clean room of spraying jigs 1.1 Before entering the paint shop, any personnel should change shoes and clean clothes in the lo…
In the technical field of spraying jigs, it specifically refers to an automatic spraying jig for laminating two-layer substrates. It is achieved by the following technical solution: the automatic spraying jig includes a first substrate unwinding devic…
Scan wechat